HideChilds = False
SystemName =

Pressure reducing

Pressure Reducing

PR - PRESSURE REDUCING - FIXED SET-POINT - Series 300

The Dorot Series 300 Pressure-Reducing (’30-PR’) valve, activated by the pressure of the pipeline, The valve reduces high upstream-pressure to a steady, pre-determined and lower downstream pressure, regardless of fluctuations in upstream-pressure or rate of flow. I case the downstream-pressure exceeds the set value, the valve will close drip-tight.

  • Better performance:

Regulates at a stable mode, regardless of valve-size, down to near-zero flow. Thus, eliminating the need for a special low flow plug-design (such as ‘V-port’) or a bypass valve.

‘Floating’, low-friction internal-trim design, guided by unique LPT® device.

  • Increased reliability:

All control ports are fitted with SST sleeves for preventing corrosion-blockage

Pre-shaped reinforced diaphragm – for easier assembly and improved longevity.

  • Reduced periodic inspection\maintenance labor:

The control-trim is fitted with a self-flushing, inline control-filter.

Easy in-situ adjustment and maintenance.

  • Versatility:
A standard and simple single-chamber valve design, provides smooth operation.  Conversion to a double chamber is a patented option. 
Read more

PR - PRESSURE REDUCING - FIXED SET-POINT - Series 100

The valve maintains a preset downstream pressure, regardless of upstream pressure or flow rate fluctuation. The main valve is controlled by either a 3-way pilot valve (allowing full opening when upstream pressure drops below the pressure set-point), or by a 2-way pilot valve (creating a minimal differential in open position).
  • Accurate, stable control from no-flow to full flow Simple and reliable design
  • Exceptionally low losses at high flow
  • WRAS Approval no. 04251
Read more

PR - PRESSURE REDUCING - FIXED SET-POINT - Series 500

The valve maintains a preset downstream pressure, regardless of upstream pressure or flow rate fluctuation. The main valve is controlled by either a 3-way pilot valve (allowing full opening when downstream pressure drops below the set-point), or by a 2-way pilot valve (creating minimal pressure differential in open position).

 

Read more

PR [D] - Differential Pressure Reducing valve - Series 300

Dorot model PR[D] is an automatic, pressure reducing valve, activated by the pressure of the pipeline. The valve creates a fixed ratio between upstream pressure and downstream pressure, regardless of fluctuations of upstream pressure and flow rate. The valve is a double chamber [D]  type.
 
Its control chamber is permanently connected to the downstream. Downstream pressure, applied to the top side of the diaphragm, creates hydraulic power which is balanced by the power created by upstream pressure to the seal disc. The area difference between the diaphragm and the seal disc determines the pressure ratio of approximately 2.7:1. No other control device is needed. Should downstream pressure exceed the above mentioned ratio (due, for example, to a halt in the pipeline flow), the valve closes drip tight. The valve instantly closes when downstream pressure exceeds upstream pressure, serving as a check valve.
 
The main valve is supplied in two models:
  • Model 30D, 30AD for medium pressure (up to 16 bar / 230 psi)
  • Model 31D, 31AD for high pressure (up to 25 bar / 350 psi).
Read more

EC (CONDOR CONTROLLED)

Dorot Series 300 Electronic Control Valve (’30-EC’) is an automatic, solenoid control valve, activated by the pressure of the pipeline. The valve controls by the versatile DOROT “ConDor” controller that enables all control functions, or combination of functions, at extreme accuracy. Can be controlled by any pulse- activating controller.

  • Better performance:

Regulates at a stable mode, regardless of valve-size, down to near-zero flow. Thus, eliminating the need for a special low flow plug-design (such as ‘V-port’) or a bypass valve.

‘Floating’, low-friction internal-trim design, guided by unique LPT® device.

  • Increased reliability:

All control ports are fitted with SST sleeves for preventing corrosion-blockage

Pre-shaped reinforced diaphragm – for easier assembly and improved longevity.

  • Reduced periodic inspection\maintenance labor:

The control-trim is fitted with a self-flushing, inline control-filter.

Easy in-situ adjustment and maintenance.

  • Versatility:

A standard and simple single-chamber valve design, provides smooth operation.  Conversion to a double chamber is a patented option.

Read more

EC-PLC CONTROLLED VALVE - SERIES 100

The valve is controlled by a PLC controller that enables local or remote control of various functions such as, time related operation, the batching of liquid, and conditional (automatically modified) control parameters, in various applications. A recommended option is using the Dorot “ConDor” controller that enables the selection from a vast range of pre-programmed control functions and their combinations.
 
  • Can perform any control function
  • Highly accurate and reliable electronic control • Low power actuation
  • Simple and reliable design
  • Controlled by Dorot ConDor valve controller or by a third party controller
Read more

Condor - Electornic Controller

A specialized controller, designed for the control of hydraulic control valves by the use of dual or quadro solenoid-valves arraignment, for the implementation of a wide range of control applications and combinations of thereof.

Read more

Advanced-safety systems

Advanced-Safety Systems

For applications in Advanced-Safety Systems please consult Dorot Application Engineering Team for further information and tailor-made solutions.

Read more
TemplateTags() in code (Designs/Dorot/_parsed/ContentWide.parsed.cshtml). Remove before going live...